Coil Winding Machine
Coil Winding Machine

Coil Winder

Your Price: 400.00
In Stock

Buyers beware; this machine is not made with aesthetic purpose in mind, though it's a very practical and rugged machine. The frame is made of cast iron and the finish is not smooth. It's rough around the edges, but that does not affect the performance in any way. This machine is very clever and innovative. It has been used for many years and will be used for years to come. 

1 year warranty included!

Can be used for many types of winding applications; some modifications might need to be made depending on the application (carefully read specifications)

  • Motor repair
  • Large size coil winding
  • Ham radio coils
  • Tesla Coils
  • Speaker or electronic workshops
  • Inductors
  • Tattoo Machines
  • Guitar Pick-Ups


  • Solid cast iron frame
  • Auto wire spread
  • Mountable Base (mounts to tables, benches or other surfaces)
  • Turn count reads up to 2500
  • 2 gear ratios available for high and low speeds
    High speed (1:6)          Low speed (1:1.5)
  • Fly wheel has a grove so that you may motorize it by adding a drive belt
  • Travel arm will move back and forth based on the preset speed for layer winding
  • The feeder travel is adjustable according to the thickness of the wire
  • The length of the winding is adjustable
  • Wire tensioner / brake also stops feed spool from over running
  • Manual reset every time can also be used to count coils off (disengage feeder and remove drive gear to reduce drag)


  • Wire size* = 0.12 – 0.91 mm (SWG # 20 – 40)
  • Min coil diameter = 12 mm (0.47”)
  • Max coil diameter = 150 mm (6”)
  • Min coil length = 6 mm (0.23”)
  • Max coil length = 150 mm (6”)
  • Shaft diameter = 10 mm (0.4”)
  • Feed wire spool max length = Approx. 5”
  • Feed wire spool max diameter = Approx. 5.2”
*Larger wires can be fed by hand (there is a special roller included to help with this and for working from larger spools)